SPECIFICATIONS SHEET FOR FLU-TECH IMS SERIES INJECTION MOULDING M/c.:- IMS32 TO IMS 130

MODEL UNIT IMS 32 RAM TYPE IMS 50 RAM TYPE IMS 85 RAM TYPE IMS 130 RAM TYPE SCREW TYPE     A           B             A           B          C  A              B      A      B      C A INJECTION UNIT:           Screw diameter mm 28          32 32          36         42 40           45 45        50       55 Injection pressure Bar 1469      1126 2626    2074     1524 2105     1665 2206  1786   1476 Swept volume cu. cm 77          101 129       163       222 220         278 310     383     463 Screw stroke Mm 125 160 175 195 Max. Injected weight(PS) Gms 70          92 117       148       202 200         253 282      349    421 Max. Injected weight(PE) Gms 55          72 92         116       158 156         197 220      272    329 Injection rate* Cc/sec 43          56 56         71         97 126        159 175      216     261 Plasticizing Rate (PS) Gr/sec 7            9 10         13         15 16          19 75        90      105 Screw length L/D 20         16.7 23         20        17.3 20          18 23         21      19 Max. Screw revolutions 1/min              300                  300      250 200 Heating capacity KW 5.5              5.6      8.6 12.1 No. of heating zones - 4                         4          4 4 Nozzle holding force kN. 27          4000 5000 6000 Nozzle stroke Mm 125       160 175 185 B. CLAMPING UNIT:                                                    Clamping force kN               320               500 850 1300 Opening force kN 25 50 70 80 Mould opening stroke Mm 355 450 520 650 Min. mould height Mm 125 150 160 190 Max. daylight Mm 480 600 680 840 Distance bet. Tie bar Mm(hxv) 280X280 350X350 425X425 450X450 Size of mould plates Mm(hxv) 400X400 500 x 500 625 x625 650 x650 Ejector force(hyd) kN 18 18 27.5 30 Ejector stroke Mm 50 100 100 100 Nozzle protrusion Mm 30 30 30   C. ELECTRICAL:           Pump Drive Motor Kw 5.5 11 15 22 Heating Kw 3.5 5.6 8.6 12.1 Total Connected Load Kw 9 16.6 23.6 34.1 D. GENERAL DATA:           Machine dimensions M(lxwxh) 3.2X0.7X1.4 4 x 0.8 x 1.5 5 x 0.9 x 1.6 5.5 x 1.0 x 1.8 Oil tank capacity LTR 175 220 300 350 Net weight(without oil) (approx) kg 2500 4000       4500 6000

Referring to polystyrene depending upon material and processing conditions,     SPECIFICATIONS SUBJECT TO CHANGE DUE TO CONTINUOUS R&D. 10 kN =1 ton app. Shot Capacity in PS=0.91*Shot Volume, in PE=0.71*Shot Volume MODELS HIGHER THEN THIS CAN BE OFFERED ON REQUEST Extra long stroke and daylights available against request